Non Woven Flexo Printing Machine
Non Woven Flexo Printing Machine
  • Ürün Açıklaması
  • Foto Galeri
  • Dosyalar
  • Ürün Videosu
  • TEKLİF AL

The non woven flexo printing machine has accurate overprinting, small color difference, bright colors and rich layers. flexo printing machine color of the machine can be customized according to your requirements.

Product Introduction

The non woven flexo printing machine is a printing machine that uses photosensitive resin as a plate, which is widely used for printing film, roll paper, food packaging and other packaging materials.has accurate overprinting, small color difference, bright colors and rich layers. flexo printing machine color of the machine can be customized according to your requirements.

Parameter

TECHNICAL SPECIFICATIONS

Model

CHCI4-600J

CHCI4-800J

CHCI4-1000J

CHCI4-1200J

Max. Web Width

650mm

850mm

1050mm

1250mm

Max. Printing Width

600mm

800mm

1000mm

1200mm

Max. Machine Speed

200m/min

Printing Speed

200m/min

Max. Unwind/Rewind Dia.

φ800mm

Drive Type

Gear drive

Plate thickness

Photopolymer plate 1.7mm or 1.14mm (or to be specified)

Ink

Water base ink or solvent ink

Printing length (repeat)

350mm-900mm

Range Of Substrates

LDPE; LLDPE; HDPE; BOPP, CPP, PET; Nylon, PAPER, NONWOVEN

Electrical supply

Voltage 380V. 50 HZ.3PH or to be specified

Technical Features

1. Ci flexo printing machine automate product quality management, and complete the production of high-quality products under the state of human-computer interaction;

2. High-speed, high-efficiency, large-scale production suitable for large-scale orders, is a powerful weapon for large-scale printing plants to improve market competitiveness;

3. Less waste of machine adjustment, high printing speed, high output efficiency;

4. Relatively simple maintenance and high safety performance

Printing Precautions

1. Sharp parts, such as the cutter at the winding and unwinding place, the scraper of each unit, etc.

2. The occlusion between the rotating parts and the tangential moving parts, such as the power transmission belt pulley of each motor of the printing press (air intake fan, main motor, winding and unwinding machine), the lifting rack and gear of each unit ink tray, etc.

3. The occlusion of the opposing rotating parts is generally called the nip point, such as gears, rubber rollers, guide rollers, etc. The bite point is the highest accident risk area on a gravure printing press, and employees need to be extra careful when working there. There have been several cases of a printing press being bitten by the bite point and biting a finger or palm. The main bite points are: the bite point between the feeding and cutting knife sticking roller and the roll film, the bite point between the guide roller and the guide roller, the bite point between the feeding and traction roller, the bite point between the cooling roller and the back pressure roller, and the embossing rubber roller. The bite point with the plate roller, the bite point between the ink transfer roller and the plate roller, the bite point at the discharge traction roller, the bite point between the receiving pressure roller and the roll film, etc.

4. Rotating shafts, including connectors, mandrels, chucks, leadscrews and rods, etc. Such as flexo printing machine retractable reel and chuck, main drive shaft and so on.

DİĞER ÜRÜNLERİMİZ
ÜRÜNLER HAKKINDABİLGİ ALIN!
Seçtiğiniz ürün hakkında detaylı bilgi almak için bilgileri eksiksiz doldurunuz.